Artificial marble · Practical application guide
Cement-based marble. Color & polishing.
Calculate background and vein pigment separately, then compare patterns after the real polishing and sealing process.

Confirm whether the binder is cement or resin
Artificial marble can describe different manufactured materials. This page concerns cement-bound decorative slabs and cast objects. Polyester, epoxy and other resin-bound products need a separate pigment-compatibility and cure assessment. Identify the binder before ordering samples. Define whether the desired appearance is a smooth colored matrix, exposed chips, a vein pattern, or a combination; each needs its own approval specimen.
Make a background-color ladder first
For the first background screen, use an uncolored control plus 1%, 2% and 4% dry-pigment candidates only if permitted for the selected grade. The Concrete Countertop Institute describes 0.5–5% of total cementitious mass as typical in its countertop context. The nonzero pigment levels are within that reference interval; it is not a recipe for resin-bound marble or a FUXIN limit. Range and material context
Keep decorative chips and veins out of this first decision. Select the background on a cured, processed specimen, then introduce the pattern as a separate variable. This prevents a stronger vein or brighter chip blend from disguising an unsuitable base shade.
Calculate the two cementitious mixes independently
Use pigment = declared cementitious mass × percentage ÷ 100. The table is arithmetic for separate qualified mixes, with no prescribed cement:sand:water proportions.
| Mix component | Reference binder | 1% pigment | 2% pigment | 4% pigment |
|---|---|---|---|---|
| Background trial | 2.00 kg | 20 g | 40 g | 80 g |
| Small vein trial | 0.50 kg | 5 g | 10 g | 20 g |
| Larger background | 10.00 kg | 100 g | 200 g | 400 g |
If the selected background is 2% and the selected vein is 4%, the first two rows require 40 g and 20 g respectively. Do not calculate the vein pigment from the whole slab’s binder. Do not assume a dark vein uses the same dosage as the background; approve each dry color first. Fine pigment doses need an appropriately accurate scale.
Cast a repeatable pattern experiment
- Prepare separately identified background and vein batches. Record each mixture’s water and admixture quantities as well as pigment.
- Use the same mould and filling direction. Weigh the amount of ready-mixed accent material used, and photograph where it is placed.
- Change one pattern variable per specimen: accent amount, placement path, or the number of combining passes. Keep the two qualified material recipes unchanged during this aesthetic comparison.
- Record the time between preparing the mixes and combining them. Avoid uncontrolled extra water to stretch a stiffening vein batch.
- Cast a plain companion and a patterned specimen from each run. Keep a repeat pattern made independently to assess reproducibility, not just a one-off attractive effect.
Polish before approving the pattern
Record the finishing machine, abrasive sequence and the point at which the target exposure is reached. Compare an as-cast companion, a processed piece and a sealed piece. The Countertop Institute notes that a smooth color sample does not automatically represent exposed-aggregate finishes. Sample and finish distinction
Inspect the edge and a cut section as well as the centre. Confirm that the vein remains visible where machining removes material. If different mixtures meet at an interface, the fabricator must verify that the finished composite is sound; an attractive pattern is not evidence of adequate bond or flexural performance.
Symptoms, likely causes and next trials
| Symptom | Check first | Next action |
|---|---|---|
| Vein disappears after polishing | Pattern depth and removal | Repeat the pattern/finishing trial together |
| Broad muddy color | Too much intermixing or unsuitable background | Reduce combining action; keep pigment fixed |
| Dark isolated spots | Pigment incorporation | Make a plain dispersion control |
| Crack or open interface | Different mixtures and casting interval | Stop; evaluate compatibility and process |
| Repair stands out | Grout texture, color and finish | Approve repair on a spare processed sample |
Keep a formula and photograph for each candidate rather than an informal instruction such as add a little black. A change in aggregate exposure can shift the apparent shade even when pigment is unchanged. Aggregate-exposure background
Scale the approved result
Repeat at a larger pattern scale before committing to full panels. Preserve background/vein mass ratios, placement sequence and processing records while the fabricator confirms the production method. Complete the intended end-use tests for the entire finished system. Send FUXIN the preferred dry samples, both weighed color formulas and photographs before and after processing; that evidence is more useful than one polished hero image.
Technical references
- Concrete Countertop Institute: Integral Pigment Types
- Concrete Countertop Institute: Making Your Own Color Samples
- NPCA: Coloring Precast Concrete
- Concrete Countertop Institute: Digital Scales and Small-Mass Errors
Independent technical guidance used for this application overview. These references are not FUXIN project case studies or a substitute for a grade-specific technical data sheet.
