GRC / GFRC components · Practical application guide
GRC / GFRC. Pigment & compatibility.
Use the correct pigment denominator, weigh low doses accurately and check the colored face together with its reinforced backing.

Identify the GRC manufacturing route
GRCA distinguishes sprayed GRC from premix processes, including vibration-compacted and self-compacting premix. Begin with the producer’s established system. Record whether pigment is intended for a separate face coat, the reinforced mix, or both. This tutorial develops color trials; it does not set glass-fiber content, component thickness, reinforcement or fixings. Keep those design and production requirements under the responsible GRC specialist. GRCA: GRC Manufacturing
Choose facing-coat trials from GRC-specific evidence
GRCA’s 2025 facing-coat guide notes that below 1% of cement mass is common and highly sensitive to weighing error; it discusses 1–5% concentrations as easier to control. That supports screening low and moderate additions rather than imposing an ordinary ready-mix dose. A proposed 0%, 0.5%, 1%, 2% face-color series should still remain within the selected pigment/system’s qualified limits. GRC-specific pigment guidance
Use cement mass for this GRCA-based illustration. Other systems may specify total cementitious mass. Do not confuse either pigment denominator with a glass-fiber percentage based on total composite mass. Pigment and fiber denominators
Calculate small doses and check weighing capability
| Facing cement mass | 0.5% pigment | 1% pigment | 2% pigment |
|---|---|---|---|
| 5 kg | 25 g | 50 g | 100 g |
| 10 kg | 50 g | 100 g | 200 g |
| 50 kg | 250 g | 500 g | 1,000 g |
GRCA’s example uses 500 g pigment for 50 kg cement at 1% and calls for weighing accuracy of 5 g. At 5 kg cement, the equivalent 1% dose is only 50 g; a 5 g error would now be 10% of the pigment, so the smaller batch needs finer control. Source example
Where a qualified mix contains 1.0 kg of a verified 50%-water polymer dispersion, that dispersion contributes 0.50 kg water. This is mass arithmetic, not a polymer-dose recommendation. Include verified carrier water from polymer and liquid pigment in the mix-water calculation.
Mix and apply the actual face/backing system
- Make an uncolored baseline and weigh the candidate pigments before wet mixing. Keep the face matrix’s binder, sand, polymer and admixtures fixed during color screening.
- Use the established premix or spray-route sequence. Record the point at which pigment enters, the mixing cycle, and the consistency before application.
- Where the system has a separate face, apply it at its qualified thickness and record the time before the reinforced backing is placed. Do not thicken the face simply to hide defects.
- Produce a trial with the actual backing, return and corner. Record spray settings or consolidation method. Maintain the approved fiber-addition procedure.
- Repeat the chosen candidate in a separate batch and include a permitted cosmetic repair on a spare sample.
Measure compatibility, not just color
The GRCA facing-coat guide treats differential movement and adhesion as important when the face and backing differ. A matched dry color does not settle these issues. Facing/backing evaluation Have the producer compare the required performance of the composite under its actual cure and exposure conditions.
GRC qualification includes appropriate flexural checks such as LOP and MOR; conventional cube strength alone is insufficient. GRC testing background Keep test results linked to the exact face and backing formulas. For visual assessment, compare equally conditioned surfaces and retain the real return detail rather than only a flat chip.
Symptoms and actions
| Symptom | Check | Next action |
|---|---|---|
| Color shifts between tiny batches | Low-dose weighing accuracy | Increase batch size or improve weighing |
| Visible fiber clusters | Face coverage and production method | Correct the qualified application process |
| Crazing, bowing or face separation | Face/backing compatibility | Hold production; investigate with the GRC specialist |
| Patchy return | Application, aggregate distribution or thickness | Repeat the actual vertical detail |
| Repair remains different | Repair formula, water and cure | Use approved repair material and a comparison sample |
Treat cracking or separation as a technical issue rather than disguising it with more color. The diagnostic table directs investigation; it does not determine structural acceptability.
Keep a complete trial record
Record pigment grams and basis, scale checks, face/backing recipes, carrier-water calculation, application interval, thickness checks, cure and test results. Send FUXIN the accepted face sample and this record for grade matching. The final choice should reproduce both the selected appearance and the qualified manufacturing behavior.
Technical references
- GRCA: GRC Manufacturing
- GRCA: Practical Guide to GRC Facing Coats, February 2025
- Concrete Countertop Institute: GFRC Step by Step, pigment versus fiber dosage
- GRCA techNOTE 2: Standards and Testing
Independent technical guidance used for this application overview. These references are not FUXIN project case studies or a substitute for a grade-specific technical data sheet.
