Iron Oxide Yellow
Request a QuoteFUXIN pigment range
Iron Oxide Yellow
Yellow pigment references for cement-based materials, with separate colored asphalt enquiries available.
per metric tonne
Select an application to see the relevant quotation information.
Cement grade references: 311, 313 and 810. Asphalt enquiries require a separately confirmed formulation.
Request a QuoteCompare yellow shades by grade.
Yellow 311, 313 and 810 are three documented starting points. Compare a representative sample in your material, then confirm the shade and current specification for your project.
Discuss your applicationProduct at a glance
- Product family
- Iron Oxide Yellow
- Documented grade references
- 311 · 313 · 810
- Application enquiry
- Cement / Colored Asphalt
- Product selection
- Confirm grade, shade and material system
Cement grade references: 311, 313 and 810. Asphalt enquiries require a separately confirmed formulation.
Grade reference data
Compare the documented references below. Brochure values are provided for initial selection; confirm the current grade specification and test methods before ordering. These values do not establish asphalt suitability.
| Grade reference | Oil absorption ml/100 g | pH | 325-mesh residue % | Moisture % | Tamped apparent density g/cm³ |
|---|---|---|---|---|---|
| 311 | 25–35 | 3–7 | ≤0.3 | ≤1.0 | 0.4–0.6 |
| 313 | 25–35 | 3–7 | ≤0.3 | ≤1.0 | 0.4–0.6 |
| 810 | 25–35 | 3–7 | ≤0.3 | ≤1.0 | 0.4–0.6 |
Source: product brochure, technical specification table, page 4. Tamped apparent density is not true density. Missing values are not inferred.
Ask for the current data sheet for your selected grade and application.
Request grade-specific TDS →Application guidance
Confirm the pigment system against your material, target shade and process conditions.

Cement-based materials
Compare the three documented yellow grades in your cement mix. The binder color, dosage and finishing process should be part of the shade discussion.

Colored asphalt
Request the appropriate yellow asphalt pigment system. The catalogue codes 311, 313 and 810 are not automatically approved for asphalt.
Request the relevant technical data sheet
Include the product family and application so the response is specific to your enquiry.
Helpful details for your request
- Iron Oxide Yellow and preferred grade, if known
- Application and material system
- Target shade and reference sample
- Process conditions and approximate quantity
Where yellow takes shape.
Application imagery is a general example, not a verified shade or grade reference.

Cement-based materials
Compare the three documented yellow grades in your cement mix. The binder color, dosage and finishing process should be part of the shade discussion.

Colored asphalt
Request the appropriate yellow asphalt pigment system. The catalogue codes 311, 313 and 810 are not automatically approved for asphalt.
Application images are illustrative. Actual color depends on the material system and process.
Need yellow specifications?
Share your application, preferred grade and target shade.
